AI MATRIX BRIDGE
Wi-Fi axis setup technology for fixed and mobile multi-way data transmission
Matrix Bridge is a technology developed by Wicell Network. The technology allows point-to-point (P2P) and point-to-multipoint (P2MP) connectivity with many outstanding features that conventional Bridge technology has not yet overcome in the actual requirements of the project.
Common Bridge technology common problems point-to-point (P2P) and point-to-multipoint (P2MP)
Waves between 2 transceivers must be in LOS (light of sight) conditions.
If the receivers lose connection to the main station, there is no solution to connect nearby base stations to maintain data transmission.
If the pier is high, the problem is that finding a suitable place is not easy, it has to be protected from lightning, the cost of the pier is very high
In practice it is not easy to implement for points in the project because of the natural shielding level
Matrix Bridge advantages
- Point-to-point (P2P) and multi-point (P2MP) technology with NO LOS (light of sight) and NLOS (non-light of sight) shielding
Centralized management of cloud computing
Supports up to 254 hops (each hop has a distance of 0.1km to 10km)
Support Failover function Allows creating 2 parallel Bridge axes on 2 bands (2.4 Ghz and 5Ghz or 2 5Ghz bands) for back-up when 1 band fails.
The speed between 2 points reaches over 1 Gibgabit
The mobile routing protocol allows when the Matrix Bridge stations are mobile, the Bridge connection routing is automatically calculated to always maintain the optimal link between the Matrix Bridge stations without any connection interruption.
Allows creating multiple Group Matrix Bridge
Allows sensitivity adjustment between 2 transceiver stations to achieve optimal wireless connection bandwidth between Bridge nodes
Quality monitoring between Bridge mesh points
Connection quality is more stable than conventional Bridge technology
Outstanding function
Automatically receive Matrix Bridge Gateway
Automatically check gateway status
Enable automatic recognition of Matrix Bridge Gateway
Allows automatic connection of different network layers
Intelligent routing: intelligent data routing
Allows setting link optimization in Bridge
Allows to select the Matrix Bridge frequency or use both frequencies to Matrix Bridge
Wave connection on anti-interference frequency.
Basic parameters 1 Matrix Bridge station
One Matrix Bridge base station has a broadcasting capacity of 1000mw. Depending on the antenna used, it can reach from 0.2km to 10km for outdoor environments
The 802.11 ac/b/g/n standard allows setting the mesh backbone bandwidth between 2 hops to be 1300 Mbps at 5Ghz.
Supports multiple ethernet ports for mounting camera/IoT devices
PoE dedicated outdoor IP67 standard and built-in lightning protection
Application
Set up point-to-point (P2P) and point-to-multipoint (P2MP) wifi networks fixed and mobile for any project status of NO LOS (light of sight) and NLOS (non-light of sight) shielded )
Instances operate 247 and do not allow data transmission interruptions and must always have a backup wireless connection
Set up wifi connection for any project size urban, rural, hilly, island
Internet transmission, IP-based digital services, internal data, IoT (smart home, automation, smart city….)
